Panasonic CQ-FX820 Operating Instructions Manual page 8

Display Controls (continued)
a BHWH-Cro2zm
ps a a (Only for CQ-FX820N)
Press [SEL] during the display control mode to change to the spectrum
analyzer mode. Press [/\TUNE] to change the spectrum analyzer set-
ting as follows. Select your desired pattern.
Pattern 1 ——» Pattern2 — +» Pattern3
Pattern Off ««—— Pattern5 ~«— Pattern4
({\VTUNE] : opposite direction)
<Only for CQ-FX720N> Level Meter (Only for CQ-FX720N)
Pattern 1 ——» Pattern2 —» Pattern3
Pattern Off ««—— Patten5 ~<«— Pattern 4
([\V TUNE] : opposite direction)
Dimmer
Press [SEL] during the display control mode to change to the dimmer
change mode. Press [\/ TUNE] to change the dimmer level setting as
follows. (Default: Dimmer 3)
Dimmer 3 Dimmer 2 Dimmer 1
(Brighter) > (Center) = (Darker)
t
22 CQ-FX820/FX720N