Advertisement
mwH=-rgozm
=
w
30
CQ-FX820/FX720N
TP Seek Tuning
Press and hold [/\ TUNE] or [\/ TUNE] for more than 0.5 seconds, then
release.
The seeking automatically stops at the next available TP sta-
tion.
Auto TP Station Preset
Press and hold [BAND](AUTO«P) for more than 2 seconds. The six
strongest available TP stations are automatically saved in the memory
on the preset button [1] to [6].
Once saved, the preset stations are sequentially scanned for 5 seconds
each.
Tuning in a TP Station Preset
Press any of the preset buttons [1] to [6] that you want to listen to. Best
Station
Research
function
is activated
to automatically
select the
strongest available frequency for the TP
station (through the built-in frequency)
lists, if reception is weak.
"
KENT 1P
Se
Muting TA on
Press and hold [TA] for more than 2 seconds to light "TA on".
Then Traffic Announcement (TA) function is activated to operate, allow-
ing you to listen to only Traffic Program whenever it is available.
Muting TA on Canceling (Muting TA on > TA on)
Press [TA] again.
Or press [/\ VOL] to increase the volume level.
TP Auto Search
If receiving conditions are poor when TA is on during muting and if there
is no
other
alternative
frequency
in the
same
network,
a traffic
announcement
station in good receiving condition is automatically
searched for.
Tape/CD changer/AUX TA on
Press [TA] during tape, CD changer, AUX mode.
When TA on mode is selected while listening to the source in that mode,
wait for Traffic Announcement to begin.
<TAPE>
Information
Ps,
FON Taon
End
Switching to TA off Mode
Select either one of the following steps.
@ Press [TA] when TA is on.
@ Press and hold [TA] for more than 2 seconds when Muting TA is on.
@ Press [TA] when tape/CD changer/AUX TA is on.
Advertisement
