Table of Contents
Advertisement
Direct Button Operation
@ VIEW MODE
You can select the screen size.
Press VIEW MODE to toggle between view modes.
E For HD programs
Cinema
Full 100%
Normal
O
Q
U
q
O
O
p
Q
O
o
o
O
Reference signal is a 4:3,
so in 16:9 signal, and
about the same but 133%
cut edge; enlarge If is 4:3,
up and down the same
signal, or so just 133%
full screen amplified
+ When using Dot by Dot or Full Screen, it is possibi
Full screen display, the
picture up and down 132%,
or so also amplifier
amplification at 132%,
physical resolution 16:9
screen as shown below
Suitable for viewing wide-
screen 2.35:1 aspect-ratio
programs in full screen.
change view mode to correct this.
E For 4:3 programs
Example: Screen size images
Full screen display, the
picture is about 133%,
and the upper and lower
amplifier amplification
and 133%
le to see noise or bars around different outer
The entire frame covered
with the whole screen
(both 16:9 or 4:3)
16:9 display, the picture
is not cut side up and
down, full screen, or so
also don't cut edge
portions of the screen. Please
Full screen display, or so
133% but not enlarge
images cut edge, fluctuation
unchanged.
E For PC input mode
amplified.
e Connect the PC before making adjustments.
e Selectable screen size may vary with input signal type.
Example: Screen size images
Full
Dot by Dot
An image fully fills the
screen.
Detects the resolution
of the signal and
displays an image with
the same number of
pixels on the screen.
Full screen display, the
picture up and down 176%,
176% or so magnified,
Full screen display, the
picture is about
the upper and lower amplifier
amplification, also 133%.
133%, and
4:3 display, the pictures are on
either side of the black side,
fluctuation don't cut edge, or so
also don't cut edge.
Advertisement
Table of Contents
