View Mode - Sharp LC-65UB30U Setup Manual

>>
Direct Button Operation
<<

VIEW MODE

You can select the screen size.
1 Press VIEW MODE.
The View Mode menu displays.
The menu lists the View Mode options selectable for the type of video signal currently being received.
2 Press VIEW MODE or / while the View Mode menu is displayed to select a desired item on the menu.
You can sequentially select a View Mode that has its own aspect ratio.
NOTE
You can have the same settings by choosing "View Mode" on the menu items.
(See page 4-30.)
Each time you press VIEW MODE when a browser screen is shown, the display pattern toggles between a website-only screen
and a TV+Web screen.
For HD programs
Stretch
Dot by Dot (Full Screen)
"Dot by Dot" when the
Suitable for viewing wide-
number of pixels on the
screen 1.78:1 aspect ratio
screen and the resolution
program, stretch mode will
of the signal are the same.
still show very thin black
"Full Screen" when the
bands at the top and
number of pixels on the
bottom of the screen.
screen and the resolution
of the signal are different.
In either case, the image
fully fills the screen.
NOTE
When using Dot by Dot or Full Screen, it is possible to see noise or bars around different outer portions of the screen. Please
change view mode to correct this.
ENG 3-12
S.Stretch (Smart stretch)
Suitable for stretching 4:3 Suitable for viewing wide-
programs to fill the screen. screen 2.35:1 aspect-ratio
programs in full screen.
Zoom