Table of Contents
Advertisement
Section 2
Verifying Connection to the Router
Step 1
Go to Start, Run, type command (for Windows 95/98/ME) or cmd (for Windows
2000/XP) and click OK. You will see the command prompt as below.
Step 2
Type ping 192.168.1.1 and press Enter. You should get four reply responses back.
Step 3
If you get
Request timed out, or Destination host unreachable, double-check the
network cable connection between the computer and the router and try
still encounter
problem, go to the next step; otherwise proceed to Section 3, Configuring the
Router.
Step 4
For Windows 2000/XP, type ipconfig/release and press Enter. (Windows 98se/ME
skip to
Step
6)
Step 2
again. If you
Advertisement
Table of Contents
