Shuffle And Repeat; Cd Text Display; Id3-Tag; Programming Track Numbers - Philips CDR795 - annexe 1 Manual

Basic functions

SHUFFLE and REPEAT

Repeating a track, a disc or a program
1
Press REPEAT repeatedly on the remote control during
playback to select either:
:The current track is played repeatedly.
REP TRACK
:The entire selected disc is played repeatedly.
REP DISC
: All discs in the set (or the program) are (is)
REP ALL
played repeatedly.
Notes:
is not possible during SHUFFLE or while playing a
REP DISC
program.
is not possible during SHUFFLE.
REP TRACK
2
Playback starts in the chosen mode.
To return to normal playback press REPEAT on the remote
0 0
control until the display indication disappears.
Playing tracks in random order
Press SHUFFLE before or during playback.
is shown and either all tracks of the program
SHUFF ALL
or of all loaded disc(s) in the CD player and
CD recorder are played in random order.

CD text display

This feature allows you to display information such as album
title or track title contained on a specially encoded CD.
Make sure to insert a CD with CD text.
is shown and the album artist's name and
CD TEXT
album title is scrolled once.
CD text when playback is stopped
Press CD TEXT/edit on the remote control to see the
following information, which will be scrolled once (if
available):
Album artist's name
Album title
CD text during playback
Press CD TEXT/edit on the remote control to see the
following information, which will be scrolled once (if
available):
Track artist's name
Track title
14

ID3-tag

This feature allows you to display information such as album
title or track title contained in an MP3-track.
If you created an ID3-tag for your MP3-track, press
CD TEXT/edit on the remote control during playback to
show the following ID3-tag information:
Album title
Track artist's name
Track title
Note: In case there is no ID3-tag available, NO TEXT will be
displayed.

Programming track numbers

A program can be used for playback or for specifying the
tracks which will be recorded.You can select up to
99 tracks (also MP3 tracks) and store them in the memory.
It is possible to store any track more than once, in any
order over CD player and CD recorder. However, it is not
possible to combine MP3 tracks and audio tracks or
MP3 tracks from more than one CD.
1
Load the desired disc(s) in the disc tray(s).
2
Press PROGRAM on the remote control to enter the
program menu.
starts blinking and PROGRAM is displayed.
PROG
The step number (
STEP
time of the actual track on the current CD are displayed.
3
If you wish to choose a track from the CD player:
Press CD on the remote control and then í or ë as
often as necessary to skip to the desired track.
If you wish to choose a track from the CD recorder:
Press CDR on the remote control and then í or ë as
often as necessary to skip to the desired track.
Note:When selecting a track which has been stored already,
P will be displayed.
4
Press PROGRAM on the remote control to store your
selection in the memory.
The total number of programmed tracks (
and the total program time are displayed.
5
Repeat steps 3–4 to select and store all desired tracks.
Note: If you try to store more than 99 tracks,
PROGRAM FULL will be displayed.
6
Press Ç to end programming.

Clearing the program

1
If necessary press Ç to stop playback.
2 Keep Ç pressed to clear the program.
PROG CLEARED is displayed and
), the track number and playing
), PRG
STEP
goes off.
PROG