Table of Contents
Advertisement
CAPTURING IMAGE
(1) Slide the power switch (®©).
(2) The number of shots remaining appears in the
LCD (@).
(3) Select Fine or Standard mode by pressing the
mode button (@).
(4) Frame your shot by looking through the optical
viewfinder (@).
(5) Press the shutter button half way to activate au-
tomatic exposure operation (©). LED (green)
lights up, then fully press the shutter button to
capture the image (©).
* When fully pressing shutter button all at once, image
capture will be done as soon as exposure operation
has been completed. If you release the shutter but-
ton before exposure operation is completed, image
capture will not be done.
*
When over or under exposure the LED (green) starts
flashing.
(6) During data recording, the LED (red) lights up,
and LED goes out recording is completed (@).
(7) Pressing the Display button (@)) will display on
LCD the number of images already in memory.
*
Please hold the camera in this manner, you pre-
vent your fingers covering the camera lens.
Advertisement
Table of Contents
