Table of Contents
Advertisement
INSTALLING LIVE PIX
Windows95/Macintosh
(1) Insert the Live Pix CD-ROM into CD-ROM drive.
(2) Follow the instructions displayed on the screen.
(3) After completion of the installation, you can see
major functions in the orientation tour. For more
details, refer to the online help.
System requirement
Windows
Microsoft® Windows®95
l486DX4 100MHz (Pentium® Recommended)
8MB RAM (16MB RAM recommended)
40MB free hard disk space
VGA (640x480) monitor with 256 colors (800x600
16-bit color recommended)
CD-ROM drive 2x or higher
Macintosh
PowerPC™ processor
Macintosh OS 7.5.3 or higher
16MB RAM Virtual Memory On (24MB RAM VM On
recommended)
40MB free hard disk space
VGA (640x480) monitor with 256 colors (832x624,
16-bit color recommended)
CD-ROM drive 2x or higher
* Live Pix SE is of a functions limited version. The
upgrade service to full version will be available from
Live Picture Inc.
Note
* Please don't take the PC Card part out of the PC
Card slot while editing images using the computer,
as stored data may be deleted.
*
Use the release lever of the computer to remove
the card from the PC Card slot. Be careful to hold
the camera to prevent it from falling.
SmartMedia can be removed from camera and
used as PC Card memory (ATA flash memory
card) by using an optional SmartMedia adapter
PC Card (3.3V)
13
Advertisement
Table of Contents
