Set The Date And Time; Eco Mode - Philips CD4911B User Manual

Exclude the contacts from silent mode
You can select the length of ring delay and
set the contacts to be excluded from the
phonebook. Ring delay is the number of rings
that will be muted before the rings become
audible on the phone.
1
Select [Menu] >
press [OK] to confirm.
2
Select [Exception].
3
Select [On] to activate, or [Off] to
deactivate the silent mode, then press [OK]
to confirm.
4
Select [Ring delay], then select an option.
5
press [OK] to confirm.
» The setting is saved.
Note
•
If [Exception] is set to [On] and [Ring delay] option
is selected, the handset rings only after length of ring
delay selected is reached.
•
Make sure that the contact under the [Set exception]
option of the phonebook menu is set to [On] before
you can exclude this contact from the silent mode.
Set the key tone
Key tone is the sound made when you press a
key on the handset.
1
Select [Menu] >
tone], then press [OK] to confirm.
2
Select [On]/[Off], then press [OK] to
confirm.
» The setting is saved.
Set the docking tone
Docking tone is the sound made when you
place the handset on the base station or charger.
1
Select [Menu] >
[Docking tone], then press [OK] to
confirm.
2
Select [On]/[Off], then press [OK] to
confirm.
» The setting is saved.
24 EN
> [Silent mode], then
> [Sounds] > [Key
> [Sounds] >
Set the sound profile
You can set the sound in the earpiece among 3
different profiles.
1
Select [Menu] >
sound], then press [OK] to confirm.
2
Select a profile, then press [OK] to
confirm.
» The setting is saved.
Access the sound profile during a call
Press [Sounds] for once or several times to
change the sound profile during a call.

Set the date and time

For further information, see chapter 'Get
started', sections 'Set the date and time' and
'Set the date and time format'.

ECO mode

The ECO mode reduces the transmission
power of the handset and base station when
you are on a call or when the phone is in
standby mode.
1
Select [Menu] >
press [OK] to confirm.
2
Select [On]/[Off], and press [OK] to
confirm.
» The setting is saved.
» ECO is displayed in standby mode.
Note
•
When ECO is set to [On], the connection range
between the handset and the base station can be
reduced.
> [Sounds] > [My
> [Eco mode], then