Technics SA-DA20 Operating Instructions Manual page 22

i
i
The radio
□
23 1
Manual
QamDg)
You can tune radio stations manually by selecting the station's
frequency, or you can preset up to 30 stations into channels to
make tuning simpler page 23).
1
Turn [INPUT SELECTOR] to select
"TUNER".
2
Press [BAND] to select "FM" or "AM".
3
Press [TUNING
V
or
A]
to select the
frequency of the station.
Tuning intervals: FM - 0.2 MHz
AM - 10 kHz
TUNED" lights when tuned.
"STEREO" lights during FM stereo broadcasts.
Automatic tuning
Hold down [TUNING
V
or
A]
until the frequency begins to scroll.
Tuning stops when a station is found. (Tuning may stop if there is
interference.)
[TUNED STEHEO'^
/ A// III!
—-
1
I
/ / / /_/ /_/ /.
1
MHz {
RQT5982
Improving reception
• FM mode
You can improve FM reception by switching reception to
monaural.
Press [FM MODE].
"MONO" lights.
Press [FM MODE] again to cancel.
• VGCA
You can improve reception by turning the VGCA on
(■^ page 20).
• For your reference
DVD players can interfere with radio reception. Turn the DVD
player off or move it further away from the antennas if this occurs.
Direct tuning
0Press [TUNER/BAND RECEIVER].
The band changes each time you press the button.
©Press [DIRECT TUNING/DISC].
©Press the numbered buttons to enter the
frequency.
e.g. To select 107.9 MHz, press [1] —' [0] -* [7] —" [9]
Tuning intervals: FM-0.1 MHz
AM - 10 kHz
Note
1. If you do not press a button while the cursor is flashing, the
display returns to the frequency being received.
2. If the frequency has not been input correctly, "ERROR" will be
displayed.