Intel SYSTEM 310 Hardware Integration Manual page 41

System 310
Adding Compatible Products
Notes:
Table 4-4. Compatible Tape Controllers
C ntr ller B ard
Descripti n
iSBX 217A
!g-inch tape drive c ntr ller
iSBX 216
i$-inch tape drive c ntr ller
• Tape drives are supported by firmware found on the 215G
Winchester hard disk controller board.
•
Tape drives are not supported by iRMX 86 and iRMX 286R
Operating Systems. You must write your own software drivers.
• Versions of these controllers support start/stop and streamer
tape drives.
COMPA IBLE MEMORY BOARDS
The System 310 uses three types of memory:
RAM boards, RAM
boards with Error Correction Codes (ECC), and RAM boards with
both ECC and Local Bus Expansion (iLBX).
Table 4-5 lists the compatible memory board products containing
these features. Any of the listed boards, with modification, will
work in any System 310, although some work better with certain
processors. (See the notes following the table.)
Table 4-5. Compatible Memory Boards
Mem ry
B ards
List f
Systems
Where Used
Maj r Features
iSBC 012B 512K bytes RAM
-3
iSBC 056A
256K bytes RAM N ne *
iSBC 012C
512K bytes ECC RAM
N ne
iSBC 056C
256K bytes ECC RAM
N ne
iSBC 012CX 512K bytes ECC RAM
iLBX bus c ntr l
-4,-5
iSBC 056CX
256K bytes ECC RAM
iLBX bus c ntr l
N ne
iSBC 304
128K bytes RAM
-2
4-5