Intel SYSTEM 310 Configuration Manual page 37

Removing and Installing Memory Boards System 310
4. Insert the bottom of the back panel into the track at the
bottom of the chassis.
5. Carefully push the excess cable into the space between the
boards and the back panel until the back panel fits flat against
the chassis.
6. lign the screw holes in the back panel with the screw holes in
the chassis, being sure not to pinch any cables, and replace the
four screws you removed earlier. Since these screws are
different sizes, be sure to replace the screws in the correctly
sized holes.
7. Install the C plug and turn the system on to run the system
confidence tests (SCTs).
5-6