Plug And Play.12 - Dukane 7700 Series User Manual

Plug and Play (continued)
Windows 98
1 Connect the computer to the projector as shown in
figure 3 on page 15
2 Power up the projector
3 Power up the computer
4 During the bootup sequence a message will appear
saying that Windows has found new hardware and is
searching for appropriate drivers.
5 An "Add New Hardware" Wizard will appear saying it is
searching for plug and play monitor drivers
6 Click on Next
7 A window asking "What do you want Windows to do" will
appear
8 Click on "Search for Best Driver"
9 A window saying "Windows will search for a new driver.,
.etc" will appear
10 Insert the UltraLight SP1 driver disk into the floppy drive
and select "Floppy Disk Drive"
11 Click on Next
12 Windows will say that it has found an updated driver for
this device.
13 Click on Next
14 Windows will say that "Windows is now ready to install
the best driver for this device" and will display the
directory for the driver.
15 Click on Next
16 A message saying "Windows has finished installing the
software..etc." will appear
17 Click on Finish
Dukane Projector User's Guide
13