Table of Contents
Advertisement
(cooking time) and when it will be
turned off (cooking end time).
1. Turn on the oven by pressing and
holding button '14'.
2. Adjust the desired operation mode
(function) by slightly twisting the
button '11 towards right or left
hand.
3. Activate the cooking time symbol
'4' by pressing the button'13' with
while the oven is operating.
4. Adjust the cooking time by slightly
twisting the button 2 towards "+" or
ll_ll
» Cooking time symbol 4 remains lit
after adjusting the cooking time.
5. Activate the cooking end time
symbol (5) by pressing the button
13 with short intervals.
6. Adjust the cooking end time by
slightly twisting the button '2'
towards"+" or
» Cooking end time symbol (5)
remains lit after adjusting the cooking
end time.
7. Place your dish in the oven.
8. Adjust the cooking temperature by
slightly twisting the button '2'
towards"+" or
» Oven timer automatically calculates
the startup time for cooking by using
the end of cooking time you have set
and the cooking period. Selected
operation mode is activated when the
startup time of cooking has come and
the oven is heated up to the set
temperature. It maintains this
temperature until the end of the
cooking time. Oven lamp lights up
during cooking.
I NOTICE
r All segments of the inner oven
temperature symbol (8) will turn on
when your oven reaches the set
temperature.
9. After the cooking process is
completed, "End" will be displayed
and the alarm signal will sound.
10. To stop the alarm signal, press
button no. '13' or '14'.
» Alarm will be silenced, oven will be
turned off automatically and current
time will be displayed on the screen.
Oven lamp will also switch off._
| NOTICE
P If you want to cancel the semi¬
automatic or automatic
programming after you have set
them, you need to reset the
cooking time.
Setting the Booster (Quick
Preheating)
It can be used to reach to the desired
inner oven temperature more quickly
by operating the oven heaters in a
combination different than the selected
function._
Important
Booster function can only be set
while the oven is operating.
Booster function can not be
selected in defrosting and cleaning
modes. Booster setting is
cancelled in case of power failure.
1. For booster function, press button
13 with short intervals until the
booster symbol (9) becomes active.
» "OFF" will be displayed.
2. Activate the booster by slightly
twisting the button 2 towards "+".
22 | EN
Advertisement
Table of Contents
