Table of Contents
Advertisement
2. Open the terminal block cover with
screwdriver.
3. Pass the mains lead through the
cable clamp under the terminal and
fix the mains lead to main body
with supplied screw via cable
tightener.
4. Connect the cables according to
the supplied diagram.
block once the wiring is complete.
I NOTICE
* Mains cable must not be longer
than 2 meters for safety
reasons.
6. The mains lead should be routed
away from the appliance and not be
trapped between the appliance and
the wall.
Installation
1. Slide the oven through the cabinet
aperture, align and secure.
washers as indicated in the figure.
Final check
1. Connect the appliance to the mains
supply and switch on the mains
supply.
2. Check function.
For equipment with a cooling fan
2
Control panel
3
Door
The Built-in cooling fan cools both the
built-in cabinet and the front of the
appliance._
NOTICE
Cooling fan continues to run for up
to 20-30 minutes (approx.) even
after the oven is turned off.
13 | EN
Advertisement
Table of Contents
