Panasonic PT-D7 Operating Instructions Manual page 23

Basic operation (Selecting. the
G
Ja
MENU button
` played if the picture is en-
L-CLICK button
(On bottom of
the remote
control)
Cursor key
— R-CLICK button
Press MENU. ,
The button lights in red and the main menu
appears on the screen.
If you don't proceed to step 2 within ten seconds,
the button goes off. A
v toh 4
< >
| SOURCE MENU
a
MENU
Note
The menu will not be dis-
larged even slightly. In
such a case, reduce the pic-
ture size to normal before
starting the menu opera-
tion.
|
Press the cursor A / V key to select
| SOURCE MENU
ae
"SOURCE MENU."
n.
* ae
Press L-CLICK.
The source menu appears on the screen.
[ioeo |
AUTO
AUTO
RGB
Press the cursor A / Y key to select the
desired input source.
i À
VIDEO,
AUTO
SVIDEO
+ AA |
RGB
AUTO
23
Ci
(e7)
input source)
Press L-CLICK.
The source you've selected in step 4 is con-
firmed, then the picture from the selected source
is projected on the screen.
Press R-CLICK to turn off the menu display.
Whenever you wish to turn off the menu display,
press the R-CLICK button.
Cu
R-CLICK
Operating using the unit
The menu operation is explained using the remote control, how-
ever, it can also be controlled using the unit operation buttons.
To operate using the unit, refer to the comparison table below.
RAO)
MENU button —) CS— ENTER button
Remote control buttons
MENU
The main menu appears on
the screen when you press
SELECT
UP/DOWN+/-
buttons
_ The remote control and unit button comparison table
Unit operation buttons
MENU |
The main menu appears on the
screen when you press this
this button. button.
To turn off any menu, press To turn off any menu, press
R-CLICK. R-CLICK on the remote
Cursor À / V keys
Press either key to select the
menu item.
Cursor + /- keys
Press either key to choose
the setting or value of the
selected menu item. '
L-CLICK
Press this button whenever
confirmation is required.
control. |
(You cannot turn off the
menu with the unit's button.)
SELECT UP/DOWN
Press either button to select
the menu item.
SELECT +/-
Press either button to choose
the setting or value of the se-
'lected menu item.
ENTER
Press this button whenever
confirmation is required.