Philips NORELCO HQ40 Quick Start Manual page 6

Every Two Months: Razor
Heads
n
Turn razor OFF.
O Press the razor head release
button and remove the Razor
Head Assembly from the
razor housing (fig. 8).
O
Press the two sides of the
S-shaped spring together and
remove the retaining frame
(fig. II).
□ Slide and remove one cutter
and comb out of the retaining
frame (fig. 12).
B Separate the cutter from the
comb.
□ Only brush the cutter in an
upward motion (fig. 13).
Q Brush the slots of the comb in
a circular motion (fig. 14) with
the supplied brush.
U Replace each cutter into the
comb and slide into the
retaining frame (fig. 16).
Q Press the retaining frame into
the Razor Head Assembly until
it locks into place (fig. 17).
[E Replace the Razor Head
Assembly back on the razor.