Checking The Program Version; Checking The Version Number; Performing A Factory Reset - Roland V-Accordion FR-8x Service Notes

Hide thumbs Also See for V-Accordion FR-8x:

Table of Contents

July 2013

Checking the Program version

Power on the FR-8x and wait for the opening window sequence: in the second window the current version number

appears under the writing "Roland FR-8x".

For FR-8X e.g.

Version: 1.06.056

Please refer to 4. Version Test (page 37) in Test Mode section.

For FR-8X e.g.

6. Turn FR-8X off.

This procedure restores all factory settings.

You may wish to save your settings to a USB storage device before initializing the FR-8x.

Please refer to FR-8X Owner's Manual for the Export /Import procedure.

1. Press the [MENU] button

2. Rotate the [DATA/ENTER] knob until you reach the UTILITY function.

3. Push the [DATA/ENTER] knob

4. Rotate the [DATA/ENTER] knob until you reach the following message:

5. Press the [MENU/WRITE] button to start initializing the FR-8x. The following message is displayed:

For FR-8XD Dallape' e.g.

Version: 1.06.056

For FR-8XD Dallape' e.g.

(069)

Table of Contents