Checking The Version Number; Users Data Save And Load; Test Mode - Roland RS-70 Service Notes

May 2003
CHECKING THE VERSION
NUMBER
While holding down the [SYSTEM] button, turn on the power. The following
screen will appear. (Continue holding down the [SYSTEM] button until the
following screen appears.) The CPU and ROM version numbers will be
displayed. Please turn off the power, if the version of CPU and ROM is
checked.
RS-70 PD Test.eps
RS-70 VERSION [US]
CPU:1.00
USERS DATA SAVE AND
LOAD
Preparing a disk for use by the RS-70
(FORMAT)
Be aware that if you format a disk, all of the data in the disk will be lost.
1.
Insert a disk into the floppy disk drive.
2.
Press [WRITE] button while holding down [SHIFT] button.
3.
Use PAGE/CURSOR [<]/[>] button to select "3:FORMAT."
FORMAT.eps
DISK MENU:
3:FORMAT
4.
Press [ENTER] button.
5.
Assign a volume label.
6.
Press [ENTER] button.
If you decide to cancel, press [EXIT] button.
When the disk has been formatted, the display will indicate
"COMPLETED." This ends the procedure.
User Backup
Here's how an image of all data in the user area can be saved to disk as one
file.
Procedure
1.
Insert a disk into the floppy disk drive.
2.
Press [WRITE] button while holding down [SHIFT] button.
3.
Use PAGE/CURSOR [<]/[>] button to select "2:SAVE."
Save-01.eps
DISK MENU:
2:SAVE
4.
Press [ENTER] button.
5.
Use VALUE [-]/[+] button to select "Type:ALL."
Save-02.eps
SAVE
TYPE:
6.
Press PAGE/CURSOR [>] button to go to the next page.
7.
Assign a file name.
Use VALUE [-]/[+] to modify the characters.
Use PAGE/CURSOR [<]/[>] to move the cursor.
The file will be saved with an extension of ".RSU".
14
ROM:1.00
[ENT]
[ENT]
>
ALL
8.
Press [ENTER] button.
Save-03.eps
SAVE
Name:
When the user memory has been saved, the display will indicate
"COMPLETED." This ends the procedure.
User Restore
Here's how data that you saved using "Type:ALL" can be loaded into user
memory.
1.
Insert a disk into the floppy disk drive.
2.
Press [WRITE] button while holding down [SHIFT] button.
3.
Use PAGE/CURSOR [<]/[>] button to select "1:LOAD."
Load-01.eps
DISK MENU
1:LOAD
4.
Press [ENTER] button.
5.
Use VALUE [-]/[+] button to select "Type:ALL."
Load-02.eps
LOAD
TYPE:
6.
Press PAGE/CURSOR [>] button to go to the next page.
7.
Use VALUE [-]/[+] button to select the file (.RSU file) that you wish to
load into the user area.
Load-03.eps
LOAD
001:
The file name will depend on the file you are loading.
8.
Press [ENTER] button.
If you decide to cancel, press [EXIT] button.
When the data has been loaded, the display will indicate "COMPLETED."
This ends the procedure.

TEST MODE

Required items
• Headphones
• Monitor speakers (MA-12 etc.) (two speakers)
• Audio cables (two)
• MIDI cable (one)
• Expression pedal (EV-5 etc.)
• Hold pedal (DP-2 etc.)
• 2HD and 2DD floppy disks (one of each type; DOS-formatted on the RS-
70 or on a PC)
• USB cable
• A computer with the RS-70 USB driver already installed
• Noise meter
[ENT]
TEST .RSU
[ENT]
>
ALL
[ENT]
RS-70 .RSU