KitchenAid YKMCS122RPS Use & Care Manual page 8

Keypad
Stop
(Unlock)
1 min-6 min
Cook Time
8
Feature
2-Step Door Opening
Quick Start
Set Manual Cooking
Instructions
This microwave comes with the added feature of a 2-step door
opening functionality to avoid unintended access.
The Stop/Unlock button can be used to pause/cancel the function
during or after cook time.
The Stop/Unlock button can be used for 2-step door opening:
1. Once you set the cooking time and press the Start button, the
Door Lock icon will appear on the display.
2. To open the microwave:
Press Stop (Unlock).
n
Press door release button.
n
NOTE: Once you press the Stop/Unlock button to stop/pause any
function, the Door Lock icon will disappear for 10 seconds and you
will be able to press the door release button to open the door.
The Door Lock icon will reappear after 10 seconds and require you to
repeat steps 1 and 2 to open the door.
NOTE: When the machine is powered on after plug-in, the 2-Step
Door function will not be triggered. If a cooking cycle starts after
the door closes, then 2 steps are required to open the door. Once
the 2 steps have been used to open the door, if the door closes and
no cooking power is applied, then you can open the door by just
pressing the door release button.
NOTE: This microwave comes with the added feature of a 2-step
door opening functionality to avoid unintended access. When
children do not have access to the appliance, there is a disable
function if the 2-step functionality is not needed.
Disable/Enable 2-step door function operation on the display
Steps to disable the 2-step door function operation:
1. After pressing the Stop/Unlock button for 3 seconds, "DI:_0" will
show on the display.
2. After pressing the "+" button, "DI:_1" will show on the display.
3. Press the Start button to confirm.
NOTE: DI (Disable)
NOTE: If you unplug the microwave, it will remember the last
operation. You will not need to disable or enable the 2 step door
function again.
Steps to enable the 2-step door function operation:
1. After pressing the Stop/Unlock button for 3 seconds, "EA:_0" will
show on the display.
2. After pressing the "+" button, "EA:_1" will show on the display.
3. Press he Start button to confirm.
NOTE: EA (Enable)
IMPORTANT: Disabling this feature should only be done when the
owner is certain and children are not present.
Default power is full in this function (P100).
"Press 1 min, 2 min... or 6 min to start with the time mentioned on the
button."
Press "Cook Time" button to set manual cooking time. The default
power level is 100%. Press "+/-" button/1 min-6 min to set the
cooking time, follow the instructions below:
1. Press "Cook Time" button, "0:15" will show on the display.
2. Press "+/-" button/1 min-6 min to adjust the cooking time.
3. Press Start button to start.
NOTE: Press the "Power" button to increase/decrease power levels
in cyclic way P10 P20 P30...........P100.