Keypad Instructions - KitchenAid YKMCS122RPS Use & Care Manual

Table of Contents

Advertisement

Available languages

Available languages

Keypad
Timer
Hold to Set the Clock
(Clock Hold
3 sec)
Timer
(Clock Hold
3 sec)
Start
(Add 30 sec)
Start
(Add 30 sec)
Stop
Microwave Pause/Stop Function
(Unlock)

Keypad Instructions

Feature
Set Kitchen Timer
Add 30 Seconds
Start Function
Instructions
To set the clock, follow the instructions below:
1. Press Timer for 3 seconds to enter clock setting.
2. Press the "+/-" button to set the hour, press the Start button to
confirm.
3. Press the "+/-" button to set the minute.
4. Press Start button.
NOTE: The microwave oven must be in standby. It will also appear
every time the product is plugged in. The screen shows "12 Hr"
( "12" flashing), use "+/-" to change 12 or 24 hour format, press Start
to confirm; then the screen shows "12:00".
The kitchen timer functions like a stop watch. To set the kitchen
timer, following the instructions below:
1. Press Timer button.
2. Press "+/-" button to enter desired time.
3. Press Start button.
NOTE: While the Timer countdown is active in the display, touch
Stop/Unlock to stop the Timer. The timer does not start or stop the
microwave oven.
The button Start can be used in two ways:
1. To start the microwave by cooking for 30 seconds with full power
in standby mode.
2. To increase a cooking time using increments of 30 seconds. Each
press adds 30 seconds.
Press the Start button to start any cooking function. If cooking is
interrupted by opening the door, touch the Start button after the door
is closed again to resume the cycle.
The Stop/Unlock button stops any microwave oven function except
for the clock.
The microwave oven will also turn off when the door is opened. When
the door is opened, the element(s) will turn off, but the microwave
oven light will remain on. Close the door and touch the Start button
to resume the preset cycle.
7

Advertisement

Table of Contents
loading

Table of Contents