TO PLAY A SOURCE
1
Set to the "
2
3
Select a desired input source.
TAPE
MONITOR
* The name of the selected input source will appear in the
display.
* Note that pressing on each input selector button selects
the source which is connected to the corresponding input
terminals on the rear panel.
8
OPERATIONS
2
4
VOLUME
∞
0
— dB
∞
" position.
POWER
INPUT
AUX
TUNER
CD
PHONO
3
7
4
Select the speakers to be used.
* If you use two speaker systems, press both the A and B
switches.
5
Play the source. (For detailed information on the tuning
operations, refer to the page 11.)
6
Adjust to the desired output level.
7
If desired, adjust the BASS, TREBLE, BALANCE and
LOUDNESS controls, etc. (Refer to page 10.)
Note
If both TAPE MONITOR and another input selector button are
selected, TAPE MONITOR has priority.
1, 6
SPEAKERS
A
B
ON
ON
OFF
OFF
VOLUME
∞
0
— dB