Yamaha R-95 Owner's Manual page 9

TO RECORD A SOURCE TO TAPE
1
Select the source to be recorded.
TAPE
MONITOR AUX
* When you select AUX, TUNER, CD or PHONO, be sure
that TAPE MONITOR is not also selected.
2
Play the source and then turn the VOLUME control up
to confirm the input source. (For detailed information
on the tuning operations, refer to the page 11.)
3
Begin recording on the tape deck.
4
To monitor the audio signals being recorded, press the
TAPE MONITOR.
TAPE
MONITOR AUX
INPUT
CD PHONO
TUNER
INPUT
TUNER CD PHONO
1, 4
Note
VOLUME, BASS, TREBLE, BALANCE and LOUDNESS
control settings have no effect on the material being recorded.
2
9