Yamaha HTR-6280 Owner's Manual page 53

Decoder Mode
Input source: HDMI1-4, AV1-4
Choices:
Auto*, DTS
Selects DTS digital audio signals for reproduction.
Auto Automatically selects audio input signals.
DTS Selects DTS signals only. Other input signals
are not reproduced.
Extended Surround
Input source: HDMI1-4, AV1-4
Choices:
Auto*, PLIIxMovie, PLIIxMusic, EX/ES, Off
Selects whether to reproduce multi-channel input signals
in 6.1- or 7.1-channel when surround back speakers are
used.
Auto Automatically selects the most suitable
decoder according to whether a flag for
reproducing surround back channel is present,
and reproduces the signals in 6.1- or 7.1-
channel.
PLIIx Always reproduces signals in 6.1- or 7.1-
Movie channel using the PLIIxMovie decoder
whether or not surround back channel signals
are contained. You can select this parameter
when two surround back speakers are
connected.
PLIIx Always reproduces signals in 6.1- or 7.1-
Music channel using the PLIIxMusic decoder whether
or not surround back channel signals are
contained. You can select this parameter when
one or two surround back speakers are
connected.
EX/ES Automatically selects the most suitable
decoder for input signals whether or not the
flag for reproducing surround back channel is
present, and always reproduces signals in 6.1-
channel.
Off Always reproduces original signals whether or
not the flag for reproducing surround back
channel is present.
Signal Info
Input source: HDMI1-4, AV1-4, USB
Displays information on audio and video signals on the
GUI screen and front panel display. You can change items
to be displayed using jCursor k / n.
• Audio information
•
Format Format of digital audio signals.
Channel The number of input signal channels
(front/surround/LFE).
For example, if input signal channels are
3 front channels, 2 surrounds and LFE,
"3/2/0.1" is displayed.
If a channel that cannot be expressed as
the above, a total number of channels
such as "5.1ch" may be displayed.
Setting the option menu for each input source (Option menu)
Sampling The sampling frequency per second in
analog-to-digital conversion.
Frequency
Bitrate The bit rate of input signal per second.
Notes
• "No Signal" is displayed when no signals are input and "---" is displayed
when signals that this unit cannot recognize are input.
• The bit rate may vary during playback.
• Video information
•
Video In Format and resolution of video input
signal.
Video Out Format and resolution of video output
signal.
Message Error messages about HDMI signals and
HDMI components. See the following for
details of the error messages.
• HDMI error message
(appears only when an error has occurred)
•
HDCP Error HDCP authentication failed.
Device Over The number of HDMI components
connected is over the limit.
Out of Res. The connected monitor is not compatible
with the video input signal.
Audio Mode
Input source: TUNER
Choices: Auto*, Mono
Sets FM (or HD Radio) broadcasting receiving mode.
Auto Receives in stereo mode by priority.
Mono Receives in monaural mode. You can get a
better reception in monaural mode.
Note
• (U.S.A. model only)
Select "Auto" to tune into HD Radio stations. When "Mono" is selected,
you can tune into analog stations only.
Auto Preset
Input source: TUNER
Automatically detects FM radio stations and registers
them as preset stations (page 30).
y
• (U.S.A. model only)
Automatically detects FM and AM HD Radio stations and analog FM
radio stations and registers them as preset stations.
Clear Preset
Input source: TUNER, XM, SIRIUS
Clears preset station (TUNER: page 31, XM: page 36,
SIRIUS: page 40).
Parental Lock
Input source: SIRIUS
Set the Parental Lock (page 41).
49
En