Vhs Index Search System - Panasonic OMNIVISION PVQ-1310 Operating Instructions Manual

Tape Operation (continued)
Direct Access
(For Normal and/or Timer recordings)
Go directly to the desired recording.
Display SELECT
SEARCH MODE screen.
Press SEARCH in
Playback or Stop mode.
• If there are no Timer
Recordings on the Program
Index List, go to step 3.
SELECT SEARCH MOOE
ZERO SEARCH
PROGRAM END SEARCH
PROGRAM INDEX SEARCH
SELECT:* ▼ KEY
SET :► KEY
END : SEARCH KEY
Display INDEX screen.
1) Press AT
to select
"INDEX
SEARCH."
2) Press ► to
display.
• This screen appears only if
there are Timer Recordings.
Select the recording
number.
"TTT1 Press
iiA NUMBERED
keys.
<5
• To calculate number, see below.
To calculate the Index Number
Example 1:
If you are watching recording 4 and you want to watch
recording 2, enter 3 in step "3" and press REW.
VHS Index Search System is ...
Each time recording is made, an invisible
index mark is placed on the tape. When
timer recordings are made, program
index and information are also included.
These index marks can be used to
access or scan recordings.
Model PVQ-2510 unit Is shown here.
4 REW 4fF
2
SELECT/SET
A;CH UP
▼ :CH DOWN
► :VOL UP
3numbered
Keys
1 SEARCH
4fF or REW
Example 2:
If you are watching recording 2 and you want to watch
recording 6, enter 4 in step "3" and press FF.
NOTE: l indicates start points of each recording.
• Make each entry within 10 seconds, or
the Index Search mode will be canceled.
• If these VHS Index Search Systems are
started very close to an index mark, that
index mark may not be counted in the
search.