Table of Contents
Advertisement
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
Steps
1. To remove the battery:
a. Use a plastic scribe to pry out the system battery.
Figure 50. Removing the system battery
CAUTION:
To prevent damage to the battery connector, you must firmly support the connector while
removing or installing a battery.
2. To install a new system battery:
a. Slide the battery with the positive side facing up under the securing tabs.
b. Press the battery into the connector until it snaps into place.
Figure 51. Installing the system battery
Safety
instructions.
Before working inside your
system.
Installing and removing system components
59
Advertisement
Table of Contents
