Table of Contents
Advertisement
Call block
Problem
The dedicated key for
Telemarketing call block is not
displayed.
Caller ID/Talking Caller ID
Problem
Caller information is not
displayed.
Caller information is displayed
or announced late.
Caller information is not
announced.
I cannot dial the phone number
edited in the caller list.
Time on the unit has shifted.
For assistance, visit www.panasonic.ca/english/support
Cause/solution
R While on charger, the MTELE.BLK.N key is not available.
Lift the handset from the charger.
R If Auto talk feature is set to on, the call is answered
automatically when the handset is lifted from the charger
during an incoming call. Turn off the auto talk feature
(page 38).
Cause/solution
R You must subscribe to Caller ID service. Contact your
phone service provider for details.
R If your unit is connected to any additional telephone
equipment such as a Caller ID box or cordless telephone
line jack, plug the unit directly into the wall jack.
R If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base unit and
the telephone line jack. Contact your DSL/ADSL provider
for details.
R The name display service may not be available in some
areas. Contact your phone service provider for details.
R Other telephone equipment may be interfering with this
unit. Disconnect the other equipment and try again.
R Depending on your phone service provider, the unit may
display or announce the caller's information at the 2nd
ring or later.
R Move closer to the base unit.
R The ringer volume is turned off. Adjust the ringer volume
(page 37).
R The Talking Caller ID feature is turned off. Turn it on
(page 37).
R The number of rings for the answering system is set to "2
rings" or "Toll saver". Select a different setting
(page 53).
R The phone number you dialed might have been edited
incorrectly (for example, the long distance "1" or the area
code is missing). Edit the phone number with another
pattern (page 47).
R Incorrect time information from incoming Caller ID
changes the time. Set the time adjustment to "Manual"
(off) (page 37).
Useful Information
61
Advertisement
Table of Contents
