Yamaha Portatone PSR-640 Owner's Manual page 99

8
Press the [NEXT] button to display the PUNCH IN/OUT
screen.
9
Select "ON."
Use the data dial, the [+/YES] button or the [-/NO] button.
10
Press the [NEXT] button to display the PUNCH IN/OUT mea-
sure screen.
11
Set the punch-in measure and the punch-out measure.
Use the data dial, the [+/YES] button, the [-/NO] button or the number buttons
[1]-[0].
• To move the cursor from "PUNCH IN" to "PUNCH OUT," use the [NEXT]
button.
• To move the cursor from "PUNCH OUT" to "PUNCH IN," use the [BACK]
button.
12
Press the [NEXT] button to display the START MEASURE
screen.
13
Set the start measure (the measure at which playback starts).
Use the data dial, the [+/YES] button, the [-/NO] button or the number buttons
[1]-[0].
14
Press the [NEXT] button to display the PART screen.
15
Record using the same operation as described in "Multi Track
Recording" on page 96, starting with step #7.
Song Recording
• The punch-out measure
number cannot be set lower
than the punch-in measure
number.
• Punch In/Out recording
cannot be used with the auto
accompaniment tracks or a
vocal harmony part.
• During recording you can
use the TRACK buttons to
turn playback of previously-
recorded tracks on or off as
required.
99