Yamaha Portatone PSR-640 Owner's Manual page 103

11
Edit the setup data.
Press the [NEXT] and [BACK] buttons to switch among the displays (as
shown below).
• Select a track by pressing one of the
[TRACK1]-[TRACK16] buttons.
• Use the data dial, the [+/YES] button,
or the [-/NO] button to change the
desired values in each display.
12
Press the [NEXT] button to display the setup data saving
screen.
13
Save the changed data to the floppy disk.
• To cancel the save operation (if
you wish to redo any edits), press
the [-/NO] button and continue
editing starting with step #11
above, after the display returns to
the SETUP DATA screen.
• To save the data to disk, press the
[+/YES] button.
14
Press the [RECORD] button to exit from the Record mode.
• Voice
[BACK] button
• Volume
[BACK] button
• Octave
[BACK] button
• Pan
[BACK] button
• Reverb depth
[BACK] button
• Chorus depth
[BACK] button
• DSP depth
The Save operation
is completed...
Song Recording
[NEXT] button
[NEXT] button
[NEXT] button
[NEXT] button
[NEXT] button
[NEXT] button
CAUTION
• While the file is being
saved, never eject the
floppy disk or turn the
power off.
103