Yamaha Portatone PSR-640 Owner's Manual page 120

Style Recording
Setting the CTAB parameters
1 7
-
Use the same operation as in "Quantize" (page 116).
8
Select "CTAB Edit."
Use the data dial, the [+/YES] button or the [-/NO] button.
9
Press the [NEXT] button to display the SECTION selection
screen.
10
Select the desired section for setting the CTAB parameters.
Use the data dial, the [+/YES] button or the [-/NO] button.
11
Press the [NEXT] button to display the TRACK selection
screen.
12
Select the desired track for setting the CTAB parameters.
Use the data dial, the [+/YES] button or the [-/NO] button.
13
Press the [NEXT] button.
14
Select the desired CTAB parameter.
Use the data dial, the [+/YES] button or the [-/NO] button.
Refer to page 119 for more information on the CTAB parameters.
15
Press the [NEXT] button to display the CTAB parameter set-
ting screen.
16
Set the CTAB parameter value.
• For NOTE LIMIT (sounding range), selected in step #14 above:
Set by using the data dial, the [+/YES] button or the [-/NO] button.
• For HIGH KEY (upper limit of the octaves), selected in step #14 above:
Set by using data dial, the [+/YES] button or the [-/NO] button.
120