Radio Basics - Panasonic CQ-DFX555LEN Service Manual

Hold and
release
CQ-DFX555/355LEN
Radio Basics
To change to Tuner Mode
Press MODE to switch the operation mode in the following order.
Tuner = CD = CD Changer Control
es
Selecting a Band
Press BAND to select the bands in the following order.
"STEREO" indicator tights if the station is broadcasting in stereo.
FM1 => FM2 => FM3 = AM(LW/MW)
pS ENE |
Manual Tuning
Press °<" or ">" to move to a lower or higher frequency,
Press and hold "<" or ">" to move to a lower or higher frequency rapid-
ly.
Seek Tuning
Press and hold "<" or ">" for more than a half second, then release.
The radio automatically stops on the next station.
Radio Basics continued
18
MONO/LOCAL Selection
@ During FM broadcasts
Press and hold PTY (MONO/LOC)
to switch the mode in the following
order. Release your finger at the desired mode.
MONO OFF MONO ON MONO ON MONO OFF
LOCAL OFF
LOCALOFF
* LOCALON
™ LOCAL ON
@ During AM broadcasts
Press PTY (MONO/LOC) on or off the LOC mode as follows.
LOCAL OFF = LOCAL ON
Preset Station Setting
Up to 24 stations can be preset in the station memory as follows;
{FM FM2_ | FM3__[AM(LW/MW)]
[6 stations { 6 stations | @stations | 6 stations |
Manual! Station Preset
@ Press BAND to select a desired band. :
@ Use manual or seek tuning to find a station that you want to program
into memory.
@ Press and hold one of the station selector buttons 1 through 6 for
more than 2 seconds until the display blinks.
Repeat the process to set other stations for the FM1 to AM bands.
iz Channel Indicator
Note: You can change the memory setting by repeating the above pro-
cedure.
Tuning in a Preset Station
Press any of the buttons 1 through 6 to tune in the station preset by the
above steps Dto @.
Auto Station Preset
Select a band, press and hold BAND (AUTO + P) for more than 2 sec-
onds.
® The 6 strongest available stations will be automatically set in memory
on preset buttons 1 through 6.
© Once set, the preset stations are sequentially scanned for § seconds
each,
play returns,
EON (Enhanced Other Networks}
When EON data is received, the EON indicator
PL (Program Identification)
lights and the TA and AF functions are expanded.
If a preset RDS station is poor in receiving condi-
TA: Traffic information from not only the station
tion when
it is selected, the automatic seek (PI
now tuned in to but also other stations of the
Seek) starts to seek the same program and tune
same network can be received.
in to it.
AF: The frequency list of the RDS stations preset
by received EON data is updated.
Program type identification signal
Example : News, rock, classical music
TA (Traffic Announcement)
Best Station Research
REG (Region)
19