Table of Contents
Advertisement
components, and driving one pair of speakers. The
surround sound processing modes will not function in
this system configuration.
l
To connect this system:
4. Connect the short bars between the MAIN IN and
_ FRONT terminals on the OUTPUT section of the rear
panel.
2. Connect the speakers to the AVC-50 rear panel speaker
connection terminals, Follow standard connection
pracedures as outlined later in this section.
(3) The AVC-50 as Preamplifier in a 4-Speaker
System
It is also possible to use the AVC-50 as a preamplifier only,
in a 4-speaker system. This requires two power amplifiers
(or receivers or integrated arnplifiers) to drive the front and
-rear speaker pars.
To connect this syste:
4. Remove the short bars from the OUTPUT terminais.
2. Connect the FRONT terminal to the power amplifier
(receiver or integrated amplifier) set up to drive the front
speaker pair This connection is made to the INPUT
terminals on a power amplifier, or to the TAPE IN, AUX,
or other input terminals on a receiver or integrated
amplifier other than PHONO.
3. Connect the REAR terminal to the power amplifier
(receiver or integrated amplifier) set up to drive the rear
speaker pair This connection is made to the INPUT
terminals on a power amplifier or to the TAPE IN, AUX,
or other input terminals on a receiver or integrated
amplifier other than PHONO.
Speaker terminals
|
A
A A A
in inii
na na
A
A
anaana a ma
A
A
A
A
A
A A
A A
A
A renere rererere hereherea haha ha tette
4-Speaker System
Bes
AVC-50 rear panel
S
m
m
(8008
y
|| MO CD GOS OEOGSHOSG
SIE
| © SOooooeoe scone!
INPUT terminal | Amplifier
INPUT terminal |
NR
nae
Rear speakers
to
Rear Amp.
Advertisement
Table of Contents
