Yamaha AVC-50 Owner's Manual page 14

TY Monitor 1
Connect the video cable from a monitor to the MON ITOR
OUT 1 jack. Note that the audio connections to the monitor
are not necessary as the audio portion of the signal is sent
to your speakers through the amplifier
TY Monitor 2
Connect the video cable from a second monitor to the
MONITOR OUT 2 jack. Note that the audio connections to
the monitor are not necessary as the audio portion of the
signal is sent to your speakers through the amplifier
| Video input terminal
Other Video Source
If necessary, connect a third video input source, such as a
camera, to the VIDEO 2 INPUT jacks on the front of the
unit Note that when a component is connected here, any
component connected to the rear panel VCR 2 terminals is
defeated.
VOR 1
Connect the video cables trom a video cassette recorder to
the VCR 1 jacks. The playback (VIDEO OUT) cable of the
VOR goes to the TAPE PB jack, and the record (VIDEO IN)
cable goes to the REC OUT jack.
| Video input
| terminal
[
Video | input terminal Y deo o Jipul terminal
EA mama
Audio input termina.
Video output terminal
eee ae T |
m A A A a aaa arana a r eaaa.
Connect the audio output cables from a video cassete
recorder to the VCR 1 jacks. The playback (AUDIO LINE
QUT cables of the VCR go to the TAPE PB jacks, and the
record (AUDIO LINE IN) cables go to the REC OUT jacks.
VCR 2
Connect the video cables from a second VCR to the VCR 2
jacks in the same way.
Connect the audio output cables from a second VCR to the
VCR 2 jacks in the same way.
ERE]
AAN AAA ca rh gan
Audio output terminal :
Video input terminal 3