Laney IRONHEART BCC-IRT30-112 User Manual page 3

INTRODUCTION
Handcrafted in the UK, our Black Country Customs IRT30-112 is a 30-Watt, super flexible,
modern sounding 1 x 12" combo. Delivering lots of smooth, high gain guitar tones and
packed full of top end features, the IRT30-112 is an extremely versatile, aggressive
sounding unit delivering plenty of low-end growl and punch. A tone Forged in Iron!
Featuring a full 3-channel pre-amp with clean, rhythm and lead channels, plus a
footswitchable front end pre-boost feature. The IRT30-112 also features the ability to
PULL/SHIFT the EQ controls allowing the player to get the exact EQ they are looking for.
The BCC-IRT30-112 features a very useful vari-watts control, which allows you to get the
tone you are after at any wattage level without compromising your amazing IRONHEART
tone.
New enhanced boost circuitry on the UK built BCC-IRONHEARTS allows you to drive the
amp hard without any of the muddiness and uncontrollable low end associated with lesser
amps.
The BCC-IRT30-112 is fitted with an 8/16 Ohm extension speaker socket allowing you to
match it with whatever extension cabinet you choose. Along with a truly awesome
sounding cabinet emulated DI out that allows you to connect you BCC-IRT30-112 directly
to the PA – removing the need to mic your cabinet and giving the engineer a great
consistent sound every time. The source of the DI signal can be switched allowing you to
can get a great recording sound using your favourite IR within your DAW. Combine these
features with an effects loop with level switching plus an AUX in and you have a great
sounding, super flexible high gain, all valve tone machine. The BCC-IRT30-112 can satisfy
even the most demanding of tone conscious players.
Lovingly handcrafted in our UK workshop, our IRONHEARTs are Forged in Iron!
FEATURES
High Power All tube heads, featuring four ECC83 preamp tubes and two
•
6L6 Power tubes
Full 30 Watts RMS
•
3 Independent Channels
•
CH1 – Clean
o
CH2 – Rhythm, with Gain, Volume and passive 3 band Tone stack
o
CH3 – Lead, with Gain, Volume and passive 3 band Tone stack
o
Switchable Pre-boost with level control
•
Digital Spring line reverb
•
Dynamics Control for Low end control
•
Master Tone Control
•
Watts control for accurate power reduction and control
•
D.I. output with Level control and source select and ground link switch
•
Loudspeaker out (8-16
•
Effects loop with switchable bypass, 0dbu or -10dbu level settings
•
Onboard HH Acoustics 12" H1280 8Ω loudspeaker
•
Robust 4W FS4 footswitch included
•
Aux In
•
Ω
)
Page 2