Chapter 12 Resetting Your Disklavier - Yamaha Mark III Operating Manual

Chapter 12
Resetting Your Disklavier
If you want to return your Disklavier to its initial factory settings, follow the Reset function below.
Resetting Your
Disklavier
You can reset all settings, the Memory Disks, or
both.
1
Specify a disk.
When you select a Memory Disk, the reset
function will be effective for the selected
disk only.
If you select Memory Disk 0, the disk is
reset in SMF format, and an "opening"
song or songs are automatically re-recorded
on the disk. If you select Memory Disk 1
to F, the disks are reset in SMF format, and
nothing is recorded on the disk.
2
Press [FUNC.].
The FUNC. indicator lights and the
Function menu appears.
3
Press [>] until the c cursor is next
to the Reset option, then press
[ENTER].
The following display appears.
78
4
Use the [–/NO] and [+/YES]
buttons to select the item that
you want to reset. Then press
[ENTER].
Option Description
Setup All settings (See next page.)
Memory Memory disk number [X] and
Disk [X] + all settings (SMF format;
Setup sample song included) (See
also next pag e.)
Memory Memory disk number [X]
Disk [X] only (SMF format; sample
song included)
Factory init. All Memory Disks are ret-
setting urned to initial factory settings
The table on the next page lists the default
settings for the items that can be reset.
5a
If you selected Setup, Memory
Disk [X] + Setup or Memory Disk
[X], press [+/YES] when a display
similar to the following appears.
5b
If you selected Factory init.
setting, press [ENTER] when the
following display appears, then
press [+/YES].