Table of Contents
Advertisement
Available languages
Available languages
3-Cont rol panel
3-9
3-10
3-11
3-12
3-13
Time
3-14
Note: The procedure to check the number of cycles that the
machine has run.
Procedure: under standby mode, select "cotton" programme first, then press "temp."
and "speed" at the same time, it will display the number of running cycles for 2 seconds,
and then back to standby interface. The cumulativer running cycles will add 1 after the
programme ends. The running cycles will be displayed in hexadecimal if it is over 9999.
10
3.5.3 Function button "Temp."
Press this button (Fig. 3-9) to change the washing tem-
perature of the programme. If no value is illuminated
(the display"--°C") the water will not be heated.
3.5.4 Function button"Speed"
Press this button (Fig. 3-10) to change or deselect the
spin of the programme. If no value is illuminated the dis-
play"0"the laundry will not spin.
3.5.5 "Extra Rinse " button
Press this button (Fig. 3-11) to rinse the laundry more
intense with fresh water. This is recommended for people
with sensitive skin.
y B
Pressing
h t
e
b
t u
itional cycles can be selected. They appear in the display
with P--0/P--1/P--2/P--3.
3.6 "Start/Pause" button
Press this bu tton (Fig. 3-12) gently to start or inter-
rupt the currently displayed programme. During pro-
gramme setting and during programme run the LED
above the button is shining, or if interrupted blinking.
3.7 Child lock
Choosing a programme and then start, touch button" Del-
ay"and "Time"( Fig .3-13) for 3 seconds simulta-
neously to block all panel elements against activation,
panel display
. For unlocking please touch again the
two buttons.The child lock indicator lights up when the
child lock works. Feature is optional when the machine
is running.
The display shows
pressed, when the child lock is activated. The change
is not running.
o t
n
e s
e v
a r
t l
m i
s e
z
e
(Fig. 3-14) if a button will be
cLo I-
EN
o r
o t
h t
e r
e
d a
- d
Advertisement
Chapters
Table of Contents
