Playback - Yamaha Electone EL-27 Owner's Manual

Playback

You can play back your recorded performance by simply pressing the PLAY button. Registrations and
other data will be recalled to the Electone.
(1) To play back a song:
1.
Select the number of the song you wish
to play back by using the SONG SELECT
buttons.
2.
Press the PLAY button.
The PLAY lamp lights up and small bars move across the
display, indicating that the M.D.R. is resetting registrations
on the Electone.
3.
Playback of the song begins after the
Electone data is reset and the song time is
shown on the M.D.R.'s display.
Playback automatically stops at the end of a song. You
can, however, stop playback in the middle of a song by
pressing the STOP button.
RECORD
UPPER LOWER PEDAL UPPER LOWER
CONTROL
SONG FROM TO
REPEAT SONG COPY
01
PAUSE STOP PLAY SONG SELECT
TEMPO
MUSIC DISK RECORDER
RECORD
UPPER LOWER PEDAL CONTROL UPPER LOWER
SONG FROM TO
REPEAT SONG COPY
---
PAUSE STOP PLAY SONG SELECT
TEMPO
MUSIC DISK RECORDER
RECORD
UPPER LOWER PEDAL UPPER LOWER
CONTROL
SONG FROM TO
REPEAT SONG COPY
00:05
PAUSE STOP PLAY SONG SELECT
TEMPO
MUSIC DISK RECORDER
Never turn off the power switch when a floppy disk
is still engaged in the M.D.R. disk drive slot. Also
do not press the Eject button during recording or
playback.
PLAY
PEDAL CONTROL SHIFT
SONG DEL.
RECORD CUSTOM PLAY
FORMAT
PLAY
PEDAL CONTROL SHIFT
SONG DEL.
RECORD CUSTOM PLAY
FORMAT
PLAY
PEDAL CONTROL SHIFT
SONG DEL.
RECORD CUSTOM PLAY
FORMAT
65