Editing Note Events - 1 - 16 - Yamaha Clavinova CVP-204 Owner's Manual

Editing Note Events — 1 - 16
From this display, you can edit individual note events (see below). Calling up operations here apply to step 4 on
page 100. Use the [BACK]/[NEXT] buttons to call up the display below.
Use these to move the
cursor up/down and select
the desired event.
Returns to the beginning
position of the current song
(the first note of the first
measure).
Use these to move the
cursor left/right and select
the desired parameter of
the highlighted event.
Determines the current
position of the event being
edited.
For coarse adjustment of the event value.
For fine adjustment of the event value.
Cuts (deletes) all selected events. The cut events
are copied and can be pasted to another location.
Note Events
Parameter
Note
Ctrl (Control change)
Prog (Program change)
P.Bnd (Pitch bend)
A.T. (After touch)
Recording Your Performances and Creating Songs — Song Creator
Adds a new event to the Event List.
Description
Determines the pitch, velocity (volume) and length of the note.
Determines the control change number and value. For details on control change messages, refer to the separate
Data List booklet (MIDI Data Format).
Determines the voice (program) number. For details on program change messages and how to set them, refer to
the separate Data List booklet (Voice List).
Determines the pitch bend value.
Determines the after touch value.
Determines the channel to
be edited.
Calls up the Step Recording
display (page 101).
Calls up the Filter display
(page 111), letting you select
only the events you wish to
shown in the Event List.
Calls up the SONG display,
from which you can save
the edited data.
Holding this button down
while using the [A] and [B]
buttons lets you select
multiple events.
Pastes all cut or copied events to
the selected location.
If the value at the cursor has been
changed, pressing this restores the
original value.
Copies all selected events. The
copied events can be pasted to
another location.
Deletes the event at
the cursor position.
To actually enter an edited
value, move the cursor away
from the value or press the
SONG [START/STOP] but-
ton.
The sound of the voices
recorded with Step recording
may sound slightly different
from the original.
109
CVP-206/204