Select The Recording Options: Starting, Stopping, Punching In/Out - Rec Mode - Yamaha Clavinova CVP-204 Owner's Manual

Select the Recording Options: Starting, Stopping,
Punching In/Out — Rec Mode
From this display you can set up how recording is started and stopped for either Quick Recording or Multi Recording.
To call up these settings, select the REC MODE display by using the [BACK][NEXT] button, after performing operation
steps 1 - 3 on page 100.
These settings determine how recording will
start.
Normal
Overwrite recording starts when you press the
SONG [START/STOP] button or when you play
the keyboard with Synchro standby set to ON.
First Key On
Overwrite recording starts as soon as you start
playing the keyboard. This setting also preserves
the previous lead-in data, letting you record over
the original lead-in without erasing it.
Punch In At
The song plays back normally up to the
indicated Punch In measure (set by the [3▲▼]
buttons), then starts overwrite recording at that
Punch In measure.
Determines the measure at which Punch In
overwrite recording starts (when "PUNCH IN
AT" is selected).
These settings determine how recording will stop as well as what happens to previously recorded data.
Replace All
This deletes all data following the point at which recording is stopped.
Punch Out
This maintains all data following the point at which recording is stopped.
Punch Out At
Overwrite recording continues until the indicated Punch Out measure (set by the [6▲▼] buttons), then
stops at that Punch Out measure, after which song playback continues normally.
About Punch In/Out
This feature is useful primarily for re-recording or replacing a specific section of an already recorded channel. The
illustrations below indicate a variety of situations in which selected measures in an eight-measure phrase are re-recorded.
REC START setting
REC END setting
Start/start overwrite recording
NORMAL
REPLACE ALL
Start/start overwrite recording *1
NORMAL
PUNCH OUT
Start/start overwrite recording *1
NORMAL
PUNCH OUT AT=006
FIRST KEY ON
REPLACE ALL
FIRST KEY ON
PUNCH OUT
FIRST KEY ON
PUNCH OUT AT=006
PUNCH IN AT=003
REPLACE ALL
PUNCH IN AT=003
PUNCH OUT
PUNCH IN AT=003
PUNCH OUT AT=006
Recording Your Performances and Creating Songs — Song Creator
Original data
1 2 3
*1
1 2 3
1 2 3
1 2 3
Start/ Start playing the keys/
start overwrite recording
play back original data
1 2 3
Start/ Start playing the keys/
play back original data start overwrite recording
1 2 3
Start playing the keys/
Start/
play back original data start overwrite recording
1 2 3
Start/
play back original data Start overwrite recording
1 2 3
Start/
Start overwrite recording
play back original data
1 2 3
Start/
play back original data Start overwrite recording
1 2 3
4 5 6 7
Stop recording *2
4 5
Deleted
Stop recording *2
4 5 6 7
Stop overwrite recording/
play original data
4 5 6 7
*2
Stop recording
4 5 Deleted
Stop recording *2
4 5 6 7
Stop overwrite recording/
play original data
4 5 6 7
Stop recording *2
4 5 Deleted
Stop recording *2
4 5 6 7
Stop overwrite recording/
play original data
4 5 6 7
Calls up the SONG display,
from which you can save the
edited data.
When this is set to ON, you
can use the sostenuto
(center) pedal to control the
punch-in and punch-out
points. Press and hold
down the sostenuto pedal to
record. Recording stops
when you release the pedal.
Determines the Punch Out
measure — the measure at
which Punch In overwrite
recording stops (when
"PUNCH OUT AT" is
selected).
When the Pedal Punch In/
Out function is set to ON, the
current function assignment
of the sostenuto pedal is
cancelled.
*1 When measures 1 - 2 are not
8
overwritten, recording starts
from measure 3.
*2 You'll have to press the [REC]
button at the end of 5 measures.
8
8
8
8
8
Previously recorded data
Newly recorded data
Deleted data
8
CVP-206/204
105