Table of Contents
Advertisement
Issue
Laundry is too damp.
Odors have formed in the
appliance.
20 Transportation, storage and
Transportation, storage and disposal
disposal
Transportation, storage and disposal
20.1 Preparing the appliance for
transportation
NOTICE:
If the appliance is operated immediately after
transportation, the refrigerant contained in the appliance
may cause damage to the appliance.
Immediately after transporting the appliance, leave it to
▶
rest for two hours before putting it into operation.
Tip: The appliance may contain residual water, which may
drip out of it when transported. The appliance should be
transported upright.
Requirements
¡ The condensation container is emptied. Emptying the
condensation container → Page 26
¡ The appliance is switched on.
→ "Switching on the appliance", Page 23
Set any program → Page 23 .
1.
Start the program → Page 24 and wait 5 minutes.
2.
a The condensation is drained.
Put the appliance into standby mode.
3.
→ "Put the appliance into standby mode", Page 24
Remove the water drain hose from the connection point.
4.
→ "Water drain connection types", Page 10
Secure the water drain hose on the appliance against
5.
unintentional loosening.
Ensure that you do not bend the water drain hose.
Empty the condensation container → Page 26 .
6.
Insert the condensation container → Page 27 .
7.
Disconnect the appliance's mains plug from the power
8.
supply.
a The appliance is now ready to be transported.
Cause and troubleshooting
→ "Cleaning the moisture sensor", Page 32 .
▶
The drying process is interrupted and the condensation container has been filled.
→ "Emptying the condensation container", Page 26 .
1.
→ "Inserting the condensation container", Page 27 .
2.
→ "Starting the program", Page 24 .
3.
Stubborn dirt in the appliance or an extended appliance downtime of more than one
month.
Run the intensive appliance care program.
▶
→ "Appliance care", Page 30
Transportation, storage and disposal en-us
20.2 Disposal of your old appliance
Environmentally compatible disposal allows valuable raw
materials to be recycled.
WARNING
Children can lock themselves in the appliance, thereby
putting their lives at risk.
Do not install the appliance behind a door as this may
▶
obstruct the appliance door or prevent it from opening.
With redundant appliances, pull out the mains plug of
▶
the power cord, cut through the power cord and remove
the appliance door.
WARNING
Although the refrigerant R290 used in this appliance is
environmentally friendly, it is flammable and may ignite if
appliances are not disposed of in the proper manner.
Dispose of the appliance in the proper manner.
▶
Do not damage the pipes in the refrigerant circuit.
▶
Unplug the appliance from the power supply.
1.
Cut through the power cord.
2.
Remove the appliance door.
3.
Dispose of the appliance in an environmentally
4.
responsible manner.
Information about current disposal methods can be
obtained from your specialist dealer or local authority.
Customer Service
21 Customer Service
With any warranty repair, we will make sure your
Customer Service
appliance is repaired by an authorized service provider
using genuine replacement parts. We use only genuine
replacement parts for all repairs.
Detailed information on the warranty period and terms of
warranty can be found in the Statement of Limited Product
Warranty, from your retailer, or on our website.
If you contact Customer Service, you will need the model
number (E-Nr.), the production number (FD) and the
consecutive numbering (Z-Nr.) of your appliance.
USA:
1-800-944-2904
www.bosch-home.com/us/owner-support/get-support
www.bosch-home.com/us/shop
37
Advertisement
Table of Contents
