Table of Contents
Advertisement
en-us Home Connect
Requirements
¡ You have started a program with the crease-removal
function.
→ "Starting a program with the crease-removal
function", Page 27
¡ The display shows:
.
¡ The condensation container → Page 26 is removed from
the appliance.
Add approx. 6.1 fl oz (180 ml) cold mains water through
1.
the front opening, using the water jug provided.
Check the water tank filter regularly and clean the filter
if it is dirty.
→ "Cleaning the water tank filter", Page 32
If
does not go out on the display, add cold drinking
water through the front opening and align the appliance
correctly.
→ "Aligning the appliance", Page 11
goes out on the display.
a
Insert the condensation container.
2.
→ "Inserting the condensation container", Page 27
Start the program.
3.
→ "Starting a program with the crease-removal
function", Page 27
15 Home Connect
Home Connect
This appliance is network-capable. Connecting your
Home Connect
appliance to a mobile device lets you control its functions
via the Home Connect app, adjust its basic settings and
monitor its operating status.
The Home Connect services are not available in every
country. The availability of the Home Connect function
depends on the availability of Home Connect services in
your country. You can find information on this at:
www.home-connect.com.
The Home Connect app guides you through the entire
registration process. Follow the instructions in the
Home Connect app to implement the settings.
Tip: Follow the instructions in the Home Connect app as
well.
28
Notes
¡ Also note the safety information in this instruction
manual and ensure that it is also observed when
operating the appliance using the Home Connect app.
→ "Safety", Page 4
¡ Operating the appliance on the appliance itself always
takes priority. It is not possible to operate the appliance
using the Home Connect app during this time.
15.1 Setting up the Home Connect app
Install the Home Connect app on your mobile device.
1.
Start the Home Connect app and set up access for
2.
Home Connect.
The Home Connect app guides you through the entire
registration process.
15.2 Setting up Home Connect
Requirements
¡ The Home Connect app is installed on your mobile
device.
¡ Wi-Fi is activated on the router.
¡ The appliance receives signals from the WLAN home
network (Wi-Fi) at its installation location.
Press and hold Remote Start for around 3 seconds.
1.
Follow the instructions in the Home Connect app.
2.
15.3 Home Connect menu
The Home Connect menu contains all of the
Home Connect settings.
Calling up the Home Connect menu
Press and hold Remote Start for at least 3 seconds.
▶
a The display shows the first setting of the Home Connect
menu.
Navigating in the Home Connect menu
Briefly press Remote Start until the display shows the
▶
required setting.
Exiting the Home Connect menu
Press and hold Remote Start for at least 3 seconds.
▶
15.4 Activating Wi-Fi on the appliance
Requirements
¡ The Home Connect menu is called up.
→ "Calling up the Home Connect menu", Page 28
¡ The display shows "oFF".
Press
to change the setting.
▶
a The display shows "on" if the Wi-Fi is activated.
Note: If the Wi-Fi is activated, the display alternately
shows "on" and the signal strength of the Wi-Fi
connection.
Advertisement
Table of Contents
