HOD Activator Tables
and
Accessories
Installation, Operation
& Service Manual
8
Side Table(s) INDAT10STL OR INDAT10STC
Must be assembled with an Aladdin activator table
Remove the side table from the carton
The side table can be attached to the right
side,
left side, or both sides of the activator table
Hold the side table next to the activator table
Align holes so the front of the side table is flush with the front of the activator table
Use the following included hardware to attach the tables together
1/4"-20,
0.50" PH Truss
11279
1 /4" Lock
washer
28331
1/4"-20 High Crown acorn nut
39260
Use a 7/16" wrench to tighten the 1/4" nuts.
Use the 1.75" bolt in the top hole
Place lock washer on bolt then secure with acorn nut
Use 0.50" bolts in bottom holes
Place lock washer on bolt then secure with acorn nut
I
I
•
ii
~
0
I
I
\
....---------,
__,
I
I
iii
. .
FOR PARTS & SERVICE CALL 1 (800) 888-5426