Advertisement
HOD Activator Tables
and
Accessories
Installation, Operation
& Service Manual
Ill.
SAFETY
If you know how to correctly install, operate, clean, and service your activator table and accessories
your satisfaction with the equipment will be increased and safety will be enhanced. In accordance
with generally accepted product safety labeling guidelines, the following three signal words are
used throughout this manual to alert you to potential hazards and to tell you how to avoid them.
WARNING:
The word "Warning" identifies a potentially hazardous situation which, if not avoided
COULD result in death or serious personal injury.
CAUTION:
The word "Caution" identifies a potentially hazardous situation which, if not avoided MAY, result in
minor or moderate injury. The word "Caution" may also be used to alert against unsafe practices
and property damage only accidents.
[ ]
"Important" is used to identify installation, operation
important but not hazard related.
or maintenance information which is
IV. INSTALLATION
6
Remove the activator table and or the overshelf or side table from their packaging. Ensure no
freight damage has occurred. If so, see section II on RECEIVING INSPECTIONS.
For INDAT10L table with legs, place table in the desired location. Check the table for
stability, if unstable looking at the front of the table, rotate legs clockwise to extend, and
counterclockwise to shorten.
For INDAT10C table with casters, roll to desired location and lock wheels.
FOR PARTS
&
SERVICE CALL 1 (800) 888-5426
Advertisement
