Advertisement
INDAT10OS Overshelf
Must be assembled with an Aladdin activator table.
Remove the overshelf from the carton.
Use the following included hardware to attached shelves to the legs
Use a 7/16" wrench to tighten the 1/4" nuts.
Slide the overshelf
into
the C channels of the activator table. Attach to the table with the following
supplied hardware.
1/4"-20 High Crown acorn nut
39260
1/4"-20, 1.50" Phillips Bolt
99942
@
With side table and overshelf
11278
1/4"-20,
1.75"
Phillips bolt
Use a 7/16" wrench to tighten the 1/4" nuts.
/~~~
l
0
0
=
=
-
I
=
Ei
FOR PARTS & SERVICE CALL 1 (800) 888-5426
7
Advertisement
