Connections - Yamaha Clavinova CLP-153SG Owner's Manual

Connections

1
AUX IN L and R Jacks
R
DOU-10
2
AUX OUT L/L+R and R Jacks
AUX OUT
R L/L+R
Stereo System
3
MIDI IN and OUT Connectors
MIDI
IN OUT
DOU-10
PHONES Jacks
(Bottom Panel)
4
MIDI
IN OUT
3
These jacks are intended for use with an external tone generator module such as
the Yamaha DOU-10 Disk Orchestra Unit. The stereo outputs from the external
AUX IN
L
tone generator module are connected to the AUX IN L and R jacks, allowing the
sound of the tone generator to be reproduced via the Clavinova's internal sound
system and speakers.
The AUX OUT L/L+R and R jacks deliver the output of the Clavinova for con-
nection to an instrument amplifier, mixing console, PA system, or recording equip-
ment. If you will be connecting the Clavinova to a monaural sound system, use
only the L/L+R jack. When a plug is inserted into the L/L+R jack only, the left-
and right-channel signals are combined and delivered via the L/L+R jack so you
don't lose any of the Clavinova's sound.
The Internal Amplifier & Speaker System
The CLP-153SG features a high-performance stereo amplifier delivering 20 watts per channel
to a pair of 16-cm speaker units.
NOTE
The MIDI IN connector receives MIDI data from an external MIDI device (such
as the DOU-10 Disk Orchestra Unit) which can be used to control the Clavinova.
The MIDI OUT connector transmits MIDI data generated by the Clavinova (e.g.
note and velocity data produced by playing the Clavinova keyboard).
More details on MIDI are given in "MIDI FUNCTIONS" on page 14.
Two pairs of standard pair of stereo headphones can be plugged in here for pri-
vate practice or late-night playing. The internal speaker system is automatically
shut off when a pair of headphones is plugged into either of the PHONES jacks.
AUX IN AUX OUT
R L R L/L+R
1 2
• The AUX OUT jack signal must never be returned to the AUX IN jacks, either
directly or through external equipment.