Communications gateway module. for use with electric fixed ratio (efr) systems to provide fieldbus communications
abilities. for professional use only. (34 pages)
Page 1
Swivels Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. See page 3 for a List of Models, including Maximum Working Pressures. Model 214711 Model 238635 Model 210657 Model 239663 Model 206831 Model 214925...
Page 3
List of Models Two Way Director Valve 5000 psi (35 MPa, 350 bar) Maximum Working Pressure Part No. Series Thread Size Seals 214711 1/4 npt(mbe) fluoroelastomer One Way Ball Valves 7400 psi (51 MPa, 510 bar) Maximum Working Pressure Part No. Series...
Page 4
List of Models Swivels 7400 psi (51 MPa, 510 bar) Maximum Working Pressure Part No. Series Thread Size Seals 236987 1/4 npsm(f) x 1/4 npsm(m) PTFE swivel Swivels 5000 psi (35 MPa, 350 bar) Maximum Working Pressure Part No. Series Thread Size Seals 214925...
D This equipment is for professional use only. D Read all instruction manuals, tags, and labels before operating the equipment. D Use the equipment only for its intended purpose. If you are not sure, call your Graco distributor. D Do not alter or modify this equipment.
Ball Valve Operation/Service Pressure Relief Procedure Two-Way Director Valve The two-way director valve is used to direct high WARNING pressure fluids in either of two directions. It is com- monly used in heated circulating systems to bleed trapped air and to direct unused, heated fluids back to SKIN INJECTION HAZARD the pump.
Two Way Valve Parts Model 214711 5000 psi (35 MPa, 350 bar) Maximum Working Pressure fluoroelastomer seals 1/4 npt(mbe), NO. PART NO. DESCRIPTION 206970 LEVER, valve 214710 HOUSING, valve 102310 NUT, hex; nylon cap; No. 10–32 fluoroelastomer 110241 SEAL, o-ring;...
Page 8
One Way Valve Parts Model 237303, Series A 7400 psi (51 MPa, 510 bar) Maximum Working Pressure 1/4 npt(mbe); PTFE seals, PEEK seat Model 237304, Series A 7400 psi (51 MPa, 510 bar) Maximum Working Pressure 3/8 npt(mbe), PTFE seals, PEEK seat Model 245860, Series A 7400 psi (51 MPa, 510 bar) Maximum Working Pressure Models 237303...
Page 9
One Way Valve Parts Model 248875 Model 248876 306861...
Page 10
One Way Valve Parts Model 238612, Series A 5000 psi (35 MPa, 350 bar) Maximum Working Pressure fluoroelastomer seals 3/8 npt(mbe), Model 238635, Series A 5000 psi (35 MPa, 350 bar) Maximum Working Pressure fluoroelastomer seals 1/4 npt(mbe), NO. PART NO. DESCRIPTION 190180 LEVER, valve...
Page 11
One Way Valve Parts Model 237469, Series A 5000 psi (35 MPa, 350 bar) Maximum Working Pressure fluoroelastomer seals, carbide seat 3/8 npt(m) x 1/4 npt(m), NO. PART NO. DESCRIPTION 102310 NUT, hex; nylon cap; No. 10–32 fluoroelastomer 110242 SEAL, o-ring; fluoroelastomer 110241 SEAL, o-ring;...
Page 12
One Way Valve Parts Model 210657, Series B Model 210659, Series B 5000 psi (35 MPa, 350 bar) Maximum Working Pressure 5000 psi (35 MPa, 350 bar) Maximum Working Pressure fluoroelastomer seals fluoroelastomer seals 1/4 npt(mbe), 3/8 npt(m) x 1/4 npt(m), Model 210658, Series B Model 223959, Series A 5000 psi (35 MPa, 350 bar) Maximum Working Pressure...
Page 13
One Way Valve Parts Model 238694, Series A 5000 psi (35 MPa, 350 bar) Maximum Working Pressure 3/8 npt(mbe), PTFE seals, stainless steel Model 235992, Series A 5000 psi (35 MPa, 350 bar) Maximum Working Pressure 3/8 npt(m) x 1/4 npt(m), PTFE seals, stainless steel Model 248271, Series A 5000 psi (35 MPa, 350 bar) Maximum Working Pressure 1/4 npt(mbe), PTFE seals, stainless steel...
Page 14
One Way Valve Parts Model 240410, Series A 5000 psi (35 MPa, 350 bar) Maximum Working Pressure 3/8 npt(mbe), PTFE seals, carbide and PEEK seats, stainless steel NO. PART NO. DESCRIPTION 102310 NUT, hex; nylon cap; No. 10–32 104893 SEAL, o-ring; PTFE 104892 SEAL, o-ring;...
Page 15
One Way Valve Parts Model 218901, Series A 5000 psi (35 MPa, 350 bar) Maximum Working Pressure 1/4 npsm(m) x 3/4–16 unf–2a, PTFE seals NO. PART NO. DESCRIPTION 178747 LEVER, valve 178743 HOUSING, valve 172094 SEAT, ball, nylon 102310 NUT, hex; nylon cap; No. 10–32 104892 SEAL, o-ring;...
Page 16
One Way Valve Parts Model 224441 5000 psi (35 MPa, 350 bar) Maximum Working Pressure fluoroelastomer seals 3/8 npt(m) one end, NO. PART NO. DESCRIPTION 102310 NUT, hex; nylon cap; No. 10–32 fluoroelastomer 110242 SEAL, o-ring; fluoroelastomer 110241 SEAL, o-ring; 164900 WASHER, flat, nylon 178746...
Check Valve Parts NOTE: To operate properly, the valve must be CAUTION mounted in an upright position with the housing (Ref No. 3, below) facing up. Do not wash nitrile o-rings in aromatic thinners as these thinners cause the o-rings to deteriorate. Model 206831 Model 206831 3000 psi (21 MPa, 210 bar) Maximum Working Pressure...
Swivel Parts NOTE: For other high pressure swivels, see instruction manual 307005. Models 239663 & 223341 Model 239663 3600 psi (25 MPa, 250 bar) Maximum Working Pressure 1/4 npt(m) x 1/4 npsm(f) swivel, leather packings Model 223341 3600 psi (25 MPa, 250 bar) Maximum Working Pressure 1/4 npt(m) x 1/4 npsm(f) swivel, PTFE packings NO.
With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.