Table of Contents
Advertisement
a
@® PHONES jack
This is a "standard plug: type jack" for headphones.
NOTE:
Sound is not heard fiom the speakers when headphones are in
use.
(2 FUNCTION switches/indicators
The indicators light for the specified functions. See page 9 for
details.
@ REMOTE SENSOR
window
@ VOLUME controi/indicator
The volume is increased when this control is turned clockwise,
decreased when turned counterclockwise. When operating with
the remote control unit, the control automatically turns clockwise
when "+" is pressed, counterclockwise when "—" is pressed,
and the indicator on the VOLUME control flashes rapidly.
The indicator also flashes when the muting function is operated
by the remote control unit.
@ BALANCE control
Usually
set
this
control
to
the
central
position.
If turned
counterclockwise, the volume of the right channe! will decrease.
If turned clockwise, the volume of the left channel will decrease.
@ MIC jack (excluding U.S. and Canadian models)
Used to connect microphones equipped with standard plug.
@ MIXING
LEVEL
(exluding
U.S.
and
Canadian
models}
Adjusts the volume of the microphone.
increasing the microphone volume reduces the source volume.
[GRAPHIC EQUALIZER SECTION]
See page 9 for details.
@ GRAPHIC EQUALIZER controls
@ SPECTRUM
ANALYZER display
| CASSETTE TAPE DECK SECTION]
© The cassette tape deck receiver is provided with an automatic
tape selector function.
Decki.....
NORMAL/CrO2, METAL
Deck.....
NORMAL/CrO,
@ DECK I TAPE COUNTER RESET switch
@ BECK 1 TAPE COUNTER
3-digital display measures tape travel on deck 4.
@ DOLBY NR indicator
@ COPY MODE indicators
@ Deck | switches
B (PLAY)
.....-.50-
Playback.
wed (REW). 0.2
Rewind
bb
(FF} 2...
Fast forward
EE/& (STOP/EJECT)....
Stops tape travel. Ejects cassette if
pressed when tape is stopped.
@ COPY MODE switches
These switches are used to select the copy mode.
HIGHS
os cdueaie
High speed copying (doubie-speed, halftime
copying)
NORMAL
.....
Normal speed copying
NOTE:
When the COPY MODE indicator is blinking {copy standby mode}
the playback operation is not available for enly DECK | or only
DECK li, and the recording operation is not available for aoe i
only.
PANEL FACILITIES
@ DOLBY *NR switch
Press to activate noise reduction system. Use to play back tapes
recorded using Dolby B NR.
© Tapes recorded'using Dolby B NR should always be played
back with the noise reduction system on. Sound quality will be
adversely affected if they are played back with the system off,
er if tapes recorded using a different noise reduction system
are played back with the Dolby 8 NR system on.
© itis recommended that tapes recorded using Dolby B NA be so
marked on the fabe!. This will help to prevent incorrect setting
of the noise reduction. switch during playback.
*
Dolby noise reduction manufactured
under license from Dolby
Laboratories Licensing Corporation.
"Dolby" and the double-D symbol 00
are trademarks of Dolby
Laboratories Licensing Corporation.
@ Deck Il PAUSE (8) switch
This switch is used to temporarily stop the tape in deck th The
PAUSE indicator lights during the pause mode. The pause mode
is cancelled when the switch is pressed again. The PAUSE switch
will not function while copying a tape.
6 Deck Hl switches
@UREC)
secs
ss
Set to the recording mode.
B (PLAY)
.
..
Playback
~a-@ (REW)..
Rewind
>
(FF)... ..-
Fast forward
V/A (STOP/EJECT)
.
Stops tape travel. Ejects cassette if
hea
ti
pressed
DECK i
DE indicators
REC (O) eis
evon er ae
Lights during recordind
PAUSE (83) .......00.
Lights during the pause mode.
MiC MIXING
{excluding U.S. and Canadian models)
NUXING KNOW-HOW
Mixing involves combining the signals from two input sources (a
microphone and a tape, for example)
SINGING ALONG WITH A PROGRAM
SOURCE
Operate after setting the MIXING LEVEL control to MIN.
. Perform the préliminary operations on page 3.
. Plug a microphone into the MIC jack.
. Adjust the volume to a suitable level.
. Set the MIXING LEVEL contro! to the center position.
if howling occurs (a high-pitched sound from the speakers},
take the following steps.
{4} Move the microphone away from the speakers.
{2} Lower the volume.
|
. Select
the desired
program
source
using
the
FUNCTION | |
switches.
i
. Start playback of the program source.
. Adjust the overall volume.
i
. Using the MIXING
LEVEL control, adjust the sound balance
|
between the microphone and the program source.
. Sing along with the program using the microphone.
/OTE:
Recording of mixed sound is possible. Although
the sound
from the speaker during playback of Deck | will be mixed
sound, recording to Deck il will be made by tape sound of the |
Deck f only.
i
*
When not using the MIXING
function,
be sure
to set the |
MIXING LEVEL control to MIN and remove
the microphone
|
plug from the MIC jack.
|
*
The
graphic
equalizer
does
not
affect
the
sound
of }
microphone.
L
PON
e220
OND
7
<ARB1179—-
Advertisement
Table of Contents
