Yamaha YHT-450 Quick Connect Manual

Quick-Connect Guide
YHT-450
Home Theater in a Box
Yamaha created this package to greatly enhance your audio and home theater enjoyment. This Quick-Connect
Guide will help you get started. Follow the steps to connect the speakers first. Then connect any of your
other components. Refer to your Owner's Manuals as well as those that came with your other components
for complete instructions and precautions. Be sure that all components are not plugged in while making
connections. You will need the following which are not included in the package: Phillips screwdriver, wire
cutter/stripper, brackets, toggle bolts, molly anchor screws or sheet metal screws.
3
7
8
2
4
Connect Center Speaker Wire to center speaker
positive (+) side of the wire with the white stripe attaches to the red
terminal. Place all speakers in desired location as shown in Step 2, Room
Layout.
9
��� ���
���� �������
Room
Layout
Speaker Placement After connection of the speakers place them so they appear in the
approximate positions as shown in the diagram above.
5

Speaker Connections

6
as shown. The

10