In addition to enhancing the sound of a video source, like your TV, DVD, or VCR, the YHT-700 also superbly reproduces audio sources, such as a CD player or a cassette deck.
YHT-700 Q Yamaha HTR-5550 Receiver (Rear Panel) NOTE: For your convenience, the Yamaha HTR-5550 receiver is equipped with two switched AC outlets(1 00 W max.). If desired, use them to power on connected components (e.g.,CD player) each time the receiver is turned on. However, do not use them for components equipped with clocks (e.g.,VCR).
YHT-700 S ONNECTING NS-A480 (Front Right Ch.) Stripe Wire Yamaha HTR-5550 A/V Receiver (Rear Panel) NS-A480 (Surround Right) Stripe Wire YHT-700 Q PEAKERS (Center Channel) RED = positive (+) use clear wire BLK = negative (-) use clear with white stripe wire Strip / "...
Page 5
Yamaha HTR-5550 Receiver (Rear Panel) NOTE: When using a hi-fi stereo VCR, set the Tuner/Line switch (on the VCR) to Line position to record from another source connected to the Yamaha HTR-5550 receiver. U I C K O N N E C T...
Page 6
DVDs recorded in the Dolby Digital or DTS Digital Surround format. REMOTE REMOTE CONTROL CONTROL Yamaha DV-C6480 DVD Player (Rear Panel) U I C K O N N E C T U I D E RCA Cable Color Codes...
Page 7
YHT-700 Q IDEO OMPONENTS Yamaha HTR-5550 Receiver (Rear Panel) NOTE: When using a hi-fi stereo VCR, set the Tuner/Line switch (on the VCR) to Line position to record from another source connected to the Yamaha HTR-5550 receiver. AUDIO VIDEO VIDEO V-AUX...
Page 8
ABLE ASIC NOTE: When using a hi-fi stereo VCR, set the Tuner/Line switch (on the VCR) to Line position to record from another source connected to the Yamaha HTR-5550 receiver. ANT In Basic Cable (From Wall Jack) Premium Cable (From Wall Jack)
(Rear Panel) OUTPUT TO SPEAKERS FROM AMPLIFIER INPUT 1 POWER YHT-700 Q YST-SW45 S UBWOOFER 4. Play an audio source and adjust the HTR-5550's VOLUME control to a desired listening level. 5. On the YST-SW45's front panel, increase the VOLUME control gradually to adjust the balance the volume between the YST-SW45 Subwoofer and the NS-A480 Main Speakers.
Page 10
SELECT TEST RETURN DISC SKIP The YHT-700 Home Theater package includes a univer- sal remote control. It comes pre-programmed with factory codes to control your HTR-5550 receiver and most Yamaha audio components. To program other brands of components (i.e., TV, VCR, etc.) or if your...
Page 11
5. To verify the code works, aim the remote control at the VCR, press VCR, and then press AV POWER. The VCR should turn off. If it doesn't respond, use another code for the same manufacturer and repeat steps 3 through 5. YHT-700 Q EMOTE ONTROL ONTINUED ETTING THER 1.