Table of Contents
Advertisement
OPERATION
EXPLANATION OF COMPONENTS
ACCELERATOR PEDAL
This pedal (2) is used to adjust the engine speed.
It can be operated freely between the engine low idle position and
the full throttle position.
GEAR SHIFT LEVER
The gear range can be selected with this lever (3) to match the
travel conditions.
Position D:
This is used when traveling normally. When this position is used,
the transmission is set automatically between the 2nd torque
converter drive and 6th gear according to the travel speed. While
the dump body is raised, however, the transmission is fixed to the
2nd gear and is not changed. Keep the dump body lowered during
travel. The maximum travel speed in this position is 58.6 km/h
(36.4 MPH).
REMARK
In conformity with the EU safety rule (EN474-6 5.1.3), the gear shift
lever is restricted to the 2nd speed and cannot be shifted in the D
position, when the machine is running while the dump body is not
fully lowered to its seat.
Position R1:
This is used when traveling in reverse. When this position is used, the transmission is fixed in R1 and the travel is
carried out in torque converter drive or direct drive according to the travel speed. The maximum travel speed in this
position is 7.6 km/h (4.7 MPH).
Position R2:
This is used when traveling in reverse. When this position is used, the transmission is fixed in R2 and the travel is
carried out in torque converter drive or direct drive according to the travel speed. The maximum travel speed in this
position is 18.1 km/h (11.2 MPH).
The machine cannot travel in reverse while the dump body is raised. Lower the dump body and set the dump lever
in the "FLOAT" position, and then set it in the "R1" or "R2" position.
https://www.besttruckmanuals.com/
3 - 41
Advertisement
Chapters
Table of Contents
